• Contains vegetable oils
• Without additional solvents
• Extremely mild and gentle to the skin
• Does not clog drains or outlets
• Alkali-free and adapted to the pH of the skin
• With citric acid to preserve the skins natural resistance
• Extremely economical (approx. 2 grams are enough)

• With orange fragrance, removes even the toughest dirt such as soot, paint, printing ink, tar, bitumen, underseal etc.
• Hand Cleaner SUPER cleans down to the pores, is easy to rinse off, does not contain sand and therefore will not clog drains or outlets

• Efficient, cream formula hand cleaner which does not attack the skin
• Removes toughest soiling such as oil, grease, tar, resin, paint etc.
• Cleans with mild ingredients and very fine abrasive materials with no organic solvents
• Contains no sand and therefore does not clog outlets or drains
• Over 90 % of the ingredients are biodegradable

• Approved by MERCEDES-BENZ (trucks) and PORSCHE
• For fast, gentle and easy fitting and demounting of all standard tyre/rim combinations
• Chemically neutral with respect to rubber and metal
• Excellent lubrication for mounting and demounting operations = fewer injuries
• Promotes adhesion between rim and tyre, prevents tyre slippage
• Non-spattering

• Facilitates mounting and demounting of extremely wide tyres on standard tyre changers
• Increased lubrication at the beginning of the mounting operation
• Fast-drying and non-spattering

• Durably seals minor leaks where the bead is seated on the rim
• Proven tyre mounting paste with additional bead sealing properties
• Ideal for mounting retreads or tyres on old rims

• For all standard mounting applications on two-wheel vehicle and car tyres
• Becomes transparent when dry

• For all standard mounting applications to car and truck tyres
• Cost-effective for big order quantities

• Bead bonding agent on resin base
• Applied with a brush to the cleaned rim seat and tyre bead before mounting
• Do not additionally use a mounting agent such as mounting paste or mounting fluid
• The tyre is then mounted within up to 30 minutes before REMAXX ANTI-GLISS LUBE dries, leaving a viscous bonding coat

• Liquid lubricant for easy mounting of SE and SIT tyres
• Effective, long-lasting gliding film
• Reduces the pressure required to mount the tyre

• Spreadable sealant for sealing leaks caused by ageing or wear on the beads
• Applied to the bead and bead seat before the tyre is inflated
• During inflation the solid matter contained in the solution is pressed into the uneven areas and seals them

Safety instruction:

• As REMAXX BEAD SEALER is flammable, do not use it to fill the tyre
• Also do not use it to seal larger bead injuries caused during tyre mounting, cuts extending to the fabric etc.