• Non-rusting high performance valves for constant delivery
• Double vibration insulation for quiet running
• Excellent cooling of the compressed air by means of unique aluminium ring cooler

• Efficient: generation, drying, cooling and storage of compressed air with minimum space and energy requirements
• Compact: all components (screw compressor, refrigeration dryer and air receiver) enclosed within a single housing
• Extremely low running costs due to maximum energy efficiency
• Easy operation
• Sound-proofed housing

• Made of polyurethane (PUR) with straight outlets on both sides
• High resistance to abrasion, wear and pressure
• Tailpiece and safety coupling rotate, DN 7.2
• Completely fitted, with antikink protection

• Flexible, abrasion and weather resistant
• Oil-resistant outside cover
• With synthetic fabric insert

• For the passage of gasoline, mineral oil, gas oil, kerosine, fuel and lubricating oil, compressed air, cold and hot water with or without detergents, vegetable and animal fat, propane, butane, light acids, industrial alcohol, pesticides, saline solution, tar, naphtha
• Short-term peak temperature: up to +110 °C

• High-quality material
• Screw saddle and band made of stainless steel
• Band is embossed, thus retaining the full profile
• Damage of the hose is avoided by design without index holes
• Material No.: 1.4016-C8 CR 17
• Slotted hexagon screw: galvanized steel

• Reliable functioning is only ensured in combination with steel bushes and nipples
• Use of brass bushes and nipples is not recommended due to higher wear and reduced safety

• Automatic shut-off, for working pressures from 1 to 16 bar
• Operating temperature -10 °C to 90 °C

• Fastest tyre inflator in the market
• 2 years guarantee
• PTB approved
• 4 individually adjustable programmes
• On-screen assisted calibration
• Can be updated via USB
• Free choice of indication kPa/PSA/bar

• Designed to meet the demands of tyre fitting shops or service stations
• Multi-functional button for special features (OPS bead seating mode, nitrogen purge function)
• PTB approved

• Progressive, light design, not susceptible to shocks
• Ceramic sensor
• Clear, precise reading
• Accurate control of inflation
• Battery control light, battery life about 950 hours
• PTB approved, calibrated version

• Pre-calibrated version
• CEE: Approved models according to European Directive 86/217/CEE

• REMA TIP TOP pump rings allow all common sizes of tubeless car and truck tyres to be inflated safely and quickly. They are especially useful for tyres which have been deformed during storage.
  
  Please ask for our special sizes, e.g. for agricultural vehicles with extra-wide wheels up to a rim diameter of 54"!

• With electronic operation

• Produces your required nitrogen in the workshop!

Requirements:

• Supply of clean compressed air without organic components (oil) and solvent vapours
• Air dryer not necessarily required

• These nitrogen generators supply the output required for inflation of truck tyres and can be operated without an additional nitrogen tank
  
  Requirements:
• Supply of clean compressed air without organic components (oil) and solvent vapours (air dryer not necessarily required)

• Recommended to avoid delays when inflating several wheel sets
• For simultaneous operation of more than one filling station
• During seasonal peaks

• Withstands high pressure due to its unique structural steel design, increasing the safety for the operator
• The risk of serious damage or accidents caused by flying tyre fragments is reduced by iron bars
• The cage can be entered from both sides

• Supplementary equipment is optionally available (not included in delivery)
• Patented tyre inflation cage made of special tough steel breaks the pressure wave in the event of an explosion and protects against flying tyre fragments
• Simplex: one protection layer, duplex: double protection layer
• Complies with all national and international safety regulations
• All safety cages of the IC series are supplied with their respective equipment fully installed
• Safety cages with special equipment such as side door with safety switch, or wheel eject system are available on request

• Safety frame for inflation of truck tyres on flat base rims with lock ring
• Can be anchored to the floor
• Conforms to the relevant safety requirements