|
|
Workshop equipment Lifting equipment Bottle jacks, hydraulic | |
| - Constructed for professional applications
- Sturdy, reinforced framework construction for heavy loads
- Complies with the most exacting international safety standards
- Jacks are provided with an ergonomic handle and are secured against accidental lowering
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5184419 | 
| Hydraulic trolley jack DK 20
| 1 | | | | |
| 5184457 | 
| Hydraulic trolley jack DK 20 HLQ
| 1 | | | | |
| 5719370 | | Axle tie-bar T3
| 1 | | | | |
| 5719350 | | Rubber block GS-1
| 1 | | | | |
| |
| - Designed for professional use
- Secure and precise control for lifting and lowering, in accordance with the most exacting safety standards
- Trolley jacks with ease of maneuverability and operation due to their compact design
- With ergonomically shaped handle
- Integrated by-pass valve prevents overloading, standard fast lifting foot pedal
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5184433 | 
| Hydraulic trolley jack DK 40 Q
| 1 | | | | |
| 5184440 | 
| Trolley jack DK 60 Q
| 1 | | | | |
| 5719360 | | Pneumatic rubber wheels G4
| 2 | | | | |
| |
| Hydraulic car trolley jack for the professional use. Lifter with 5 tons lifting capacity and a maximum lifting height of 975 mm. Specifically designed for light truck and agricultural applications. |
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5184464 | 
| Hydraulic trolley jack DK 50 HLQ
long | 1 | | | | |
| 5719360 | | Pneumatic rubber wheels G4
| 2 | | | | |
Trolley jacks, air hydraulic | |
| - This air hydraulic trolley jack was developed for the truck workshop
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5197729 | 
| PROLIFT 215N
| 1 | | | | |
| 5197560 | 
| PROLIFT 215P
| 1 | | | | |
| 5197530 | 
| PROLIFT 217N
| 1 | | | | |
| 5197570 | 
| PROLIFT 222N
| 1 | | | | |
| 5197580 | 
| PROLIFT 312
| 1 | | | | |
| 5197620 | | V-saddle
| 1 | | | | |
| 5197590 | | Jack saddle
140 mm | 1 | | | | |
Axle stands | |
| - Castors allow easy placement underneath the truck or other vehicle
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5191440 | 
| Axle stand
mobile | 1 | | | | |
| 5191457 | | Handle
| 1 | | | | |
Lifting equipment, motorcycle, quad
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5183190 | 
| PROLIFT MOTO 1500
| 1 | | | | |
| 5183180 | 
| PROLIFT MOTO 1900
| 1 | | | | |
| 5183160 | | Wheel clamp
pneumatic | 1 | | | | |
| 5183150 | | Wheel clamp
manual | 1 | | | | |
| 5183170 | | Additional lift
| 1 | | | | |
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5192220 | | Centre-type stand for motorcycle
| 1 | | | | |
| 5192221 | | Set of fittings
| 1 | | | | |
| 5192339 | 
| Mounting stand square bar
| 1 | | | | |
| 5192346 | | Double castors
| 1 | | | | |
| 5192480 | 
| Quad adapter
| 1 | | | | |
| 5192401 | 
| Front jack square bar
| 1 | | | | |
| 5192080 | 
| Front adapter square bar
| 1 | | | | |
| 5192353 | 
| Universal holder square bar
| 1 | | | | |
| 5192360 | 
| Racing adapter
with socket holder M6 | 1 | | | | |
| 5192377 |
| Racing adapter
with socket holder M8 | 1 | | | | |
| 5192384 |
| Racing adapter
with socket holder M10 | 1 | | | | |
| 5192391 |
| Racing adapter
with socket holder M12 | 1 | | | | |
| 5192270 | 
| Click adapter
without socket kit | 1 | | | | |
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5192425 | 
| Single-arm post professional
with ball bearings | 1 | | | | |
| 5192070 | | Arbour
| 1 | | | | |
| 5192060 | 
| Arbour
| 1 | | | | |
| 5192432 | 
| Arbour
| 1 | | | | |
| 5192449 | 
| Arbour
| 1 | | | | |
| 5192456 | 
| Arbour
| 1 | | | | |
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5196706 | | Mounting stand kit No. 1
| 1 | | | | |
| 5192280 | | Mounting stand kit BASIC
| 1 | | | | |
| 5192290 | | Mounting stand kit UPGRADE
| 1 | | | | |
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5192463 | 
| Front stand tube-type
with threaded spindle | 1 | | | | |
| 5192470 | | Arbour
| 1 | | | | |
| |
| - Extremely solid scissor construction for motorcycles without a main stand
- Height continuously adjustable - can be locked at two positions
- Motorcycles without frame trussing can be lifted using different, optional adapters
- With an additional set of castors, the jack can be moved easily inside the workshop
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5192308 | 
| Motorcycle jack X5H1
| 1 | | | | |
| 5192315 | 
| Set of castors X5R1B
| 1 | | | | |
| 5192322 | | Rubber block X54S
| 1 | | | | |
Jacking air cushions | |
| - Fits under any vehicle when there is no space for placing a trolley or bottle jack
- Simply drive onto the bag and lift from under the tyre
- Perfect for truck break-down service
- Easy handling
- Extremely flat - height only approx. 25 mm
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5191402 | 
| Jacking air cushion
| 1 | | | | |
| 5191426 | | Spare tube
| 1 | | | | |
Forklift jacks | |
| - Simple and sturdy construction
- Hard chrome-plated piston rod
- With overload valve
- The scissor-type saddle is appropriate for service on forklift trucks up to 4 tons, while the cylinder saddle is used for lifting agricultural vehicles up to 5 tons
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5184543 | 
| PROLIFT forklift jack 640 FJ
| 1 | | | | |
Short platform lifts | |
| - Electro-hydraulic scissor lift for tyre service
- Easy to handle drive-on and drive-off ramps
- Hydraulic synchronisation of platforms
- Overload safety-valve
- Safety-valve in case of sudden loss of pressure
- Automatic lowering control
- 'Dead man' controls (24 V)
- Acoustic warning in final descent phase
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5199700 | 
| PROLIFT 5307 C
| 1 | | | | |
Double scissors lift | |
| - Extra-low-profile scissor lift
- Easy to handle drive-on and drive-off ramps
- Hydraulic synchronisation of platforms
- Overload safety-valve
- Safety-valve in case of sudden loss of pressure
- Automatic lowering control
- 'Dead man' controls, 24 V
- Acoustic warning in final descent phase
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5199710 | 
| PROLIFT 5302 LP
| 1 | | | | |
2-post lifts | |
| - Asymmetric, electro-hydraulic 2-post lift, without baseframe
- Electro-mechanical locking device in case of rope failure
- Automatic arm locking device
- Interchangeable screw pads
- Foot guards
- Overload safety-valve, descent control valve
- Electrically-controlled fail safety device
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5199600 | 
| PROLIFT 5107
| 1 | | | | |
| |
| - Symmetric, electro-hydraulic 2-post lift without baseframe
- Electro-mechanical locking device
- Automatic arm locking device
- Interchangeable screw pads
- Overload safety-valve, descent control valve
- 'Dead man' controls, 24 V
- Manual or electrical command for final descent
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5199610 | 
| PROLIFT 5103
| 1 | | | | |
4-post lifts | |
| - Particularly rigid, electro-hydraulic 4-post lift for wheel alignment
- Front recesses for turn plates
- Rear slip plates integrated into runway
- Safety device in case of rope failure
- Overload safety-valve, safety valve in case of sudden loss of pressure, descent control valve
- Electrically controlled fail safety device
- Automatic descent control
- Acoustic warning in final descent phase
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5199650 | 
| PROLIFT 5206 L5
| 1 | | | | |
| 5199660 |
| PROLIFT 5206 LT
| 1 | | | | |
| |
| - Further accessories on request
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5183340 | | Lighting kit
| 1 | | | | |
| 5183360 | | Retrofit kit for wheel alignment
| 1 | | | | |
| 5182370 | 
| Polymer support blocks
| 1 | | | | |
| 5182387 |
| Polymer support blocks
| 1 | | | | |
| 5182394 |
| Polymer support blocks
| 1 | | | | |
Scissor lifts | |
| - Scissors lift with integrated lift table equipped with extendable jacking beam
- High flexing and torsion resistance enables accurate and professional wheel alignment
- Easy to install and service due to the rational design and high quality of the components
- Five-ton model available on request
|
| Art. Nr. | Product name | capacity[unit] | packing unit | division into shares | | 5189740 | 
| PROLIFT MAS 0.45
| 1 | 1 | | | | |
| 5189620 |
| PROLIFT MAS 0.45 LT
| 1 | | | | | |
| Art. Nr. | Product name | capacity[unit] | division into shares | packing unit | | 5189690 | 
| Jacking beam
| 1 | | | | | |
| 5189670 | | Lighting kit
24 V | 1 | | | | | |
| 5189680 | | In-ground frame
for flush-mounted version | 1 | | | | | |
| 5182370 |
| Polymer support blocks
| 1 | | | | | |
| 5182387 |
| Polymer support blocks
| 1 | | | | | |
| 5182394 |
| Polymer support blocks
| 1 | | | | | |
| 5189790 | | Kit for floor-mounted version
| 1 | | | | | |
| 5189800 | | Kit for flush-mounted version
| 1 | | 1 | | | |
Wheel lift | |
| - Wheel lift, floor mounted
- Platform rests on the floor in bottom position
- Cage with circumferential rail (can be opened) and contact switch
- Locking mechanism for prevention of accidents
- Acoustic warning (foot guard)
- Control like 2 post-lift
- Supporting column of special rolled section
- Lift truck with sixfolded mounted on roller bearings and carry-/lock nut
- V-belt drived motor with thermal fuse
|
| Art. Nr. | Product name | capacity[unit] | division into shares | | 5182507 | 
| Wheel lift
cage opening, one-sided | 1 | | | | |
| 5182514 |
| Wheel lift
cage opening, two-sided | 1 | | | | |
| 5182521 |
| Wheel lift
cage opening, three-sided | 1 | | | | |
| 5182538 | | 1st lifting extension
| 1 | | | | |
| 5182545 | | 2nd - 4th lifting extension
| 1 | | | | |
|
