Home / Products  / Industrial Program / Coating systems / REMACOAT
Coating systems
REMACOAT 2K polyurea corrosion and abrasion protection spray coatings
REMACOAT 2K spray coatings
Properties

REMACOAT polyurea coatings are highly reactive two-component spray-on systems that are applied with 2K high-pressure airless injection machines. REMACOAT is not sensitive to moisture during processing and can also cross-link at low ambient temperatures.
Combined with the appropriate primers, REMACOAT systems are suitable for the coating of steel, concrete, light metals and other surfaces, and are available in hardnesses from 60 Shore A to 50 Shore D.
The two-component spray system is comprised of an ISO and POLY component and is volumetrically combined at a 100:100 ratio.

   Area of application

REMACOAT systems are used as multifunctional surface protection, such as for waterproofing buildings, corrosion protection, coating and abrasion protection. Layer thicknesses of 25 mm and more can be applied in a single application.
Coating structure


REMACOAT A-60
Properties

  • Long gel or hardening times
  • Excellent weather resistance even at high ozone concentrations as well as with dynamic loads
  • Standard colour: gray; other colours on request


   Area of application

  • Cold-storage rooms and low-temperature rooms
  • Production of elastic forms
REMACOAT A-60
Specific weight
1.00 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 10 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 550%ISO 37-1994 (DIN 53504)
Hardness
60 ± 5 Shore AISO 868-2003 (DIN 53505)
Volume abrasion
175 mm³DIN ISO 4649-2006
Resilience
min. 35%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 18 N/mm²ISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5902710
REMACOAT A-60 ISO 20 kg1transparent
5902730
REMACOAT A-60 POLY 20 kg1gray
5902720
REMACOAT A-60 ISO 215 kg1transparent
5902740
REMACOAT A-60 POLY 200 kg1gray
top
REMACOAT A-70 S
Properties

  • Significantly longer gel and hardening times than REMACOAT A-80
  • Natural flowing properties of the material (corners and edges)
  • Good levelling of layer thickness over large application areas
  • Smooth surface
  • High resilience
  • Standard colour: gray; other colours on request


   Area of application

  • Screening machines
  • Slip ground containers
  • Cable drums
  • Steel beam constructions
  • Pump housings
REMACOAT A-70 S
Specific weight
1.01 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 7 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 350%ISO 37-1994 (DIN 53504)
Hardness
70 ± 5 Shore AISO 868-2003 (DIN 53505)
Volume abrasion
max. 200 mm³DIN ISO 4649-2006
Resilience
min. 45%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 15 N/mm²ISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5902750
REMACOAT A-70 S ISO 20 kg1transparent
5902770
REMACOAT A-70 S POLY 20 kg1gray
5902760
REMACOAT A-70 S ISO 225 kg1transparent
5902780
REMACOAT A-70 S POLY 208 kg1gray
top
REMACOAT A-80
Properties

  • Good abrasion resistance
  • Fast application and ability to withstand exposure due to short gel times
  • Resists hydrolysis
  • Standard colour: gray; other colours on request


   Area of application

  • Bunkers
  • Containers
  • Excavator buckets
  • Drums
  • Components for storing and conveying bulk materials
REMACOAT A-80
Specific weight
1.04 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 14 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 385%ISO 37-1994 (DIN 53504)
Hardness
90 ± 5 Shore AISO 868-2003 (DIN 53505)
Volume abrasion
140 mm³DIN ISO 4649-2006
Resilience
min. 40%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 25 N/mm²ISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5902938
REMACOAT A-80 ISO 20 kg1transparent
5902921
REMACOAT A-80 POLY 20 kg1gray
5902914
REMACOAT A-80 ISO 222 kg1transparent
5902952
REMACOAT A-80 POLY 208 kg1gray
top
REMACOAT A-80 HP
Properties

  • Highly abrasion resistant
  • Fast hardening
  • High temperature resistance
  • Very good impact resistance
  • Standard colour: gray; other colours on request


   Area of application

  • Silos
  • Lorry tippers
  • Railway wagons
  • Excavator buckets
  • Material feed/load points
REMACOAT A-80 HP
Highly abrasion resistant
Specific weight
1.05 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 15 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 300%ISO 37-1994 (DIN 53504)
Hardness
80 ± 5 Shore AISO 868-2003 (DIN 53505)
Volume abrasion
80 mm³DIN ISO 4649-2006
Resilience
min. 38%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 14 N/mm²ISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5903370
REMACOAT A-80 HP ISO 20 kg1transparent
5903380
REMACOAT A-80 HP POLY 20 kg1gray
5903360
REMACOAT A-80 HP ISO 222 kg1transparent
5903350
REMACOAT A-80 HP POLY 206 kg1gray
top
REMACOAT D-40
Properties

  • Good chemical and thermal resistance
  • High resistance to tear propagation
  • Good resistance to aging and atmospheric conditions
  • Resists hydrolysis
  • Standard colour: gray; other colours on request


   Area of application

  • Wastewater lagoon and pool linings
  • Secondary containment
  • Seawater desalination plants
  • Storage reservoirs
REMACOAT D-40
General technical approval as an organic surface protection for concrete in LAU systems in accordance with DIBt: Z-59.12-305
Specific weight
1.12 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 15 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 200%ISO 37-1994 (DIN 53504)
Hardness
45 ± 5 Shore DISO 868-2003 (DIN 53505)
Volume abrasion
max. 200 mm³DIN ISO 4649-2006
Resilience
min. 30%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 20 N/mmISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5902866
REMACOAT D-40 ISO 20 kg1transparent
5902873
REMACOAT D-40 POLY 20 kg1gray
5902897
REMACOAT D-40 ISO 224 kg1transparent
5902907
REMACOAT D-40 POLY 230 kg1gray
top
REMACOAT D-40 S
Properties

  • Good chemical and thermal resistance
  • Significantly longer gel and hardening times as well as greater elongation at break at the same degree of hardness when compared with REMACOAT D-40
  • Natural flowing properties of the material (corners and edges)
  • More uniform surfaces
  • Standard colour: gray; other colours on request


   Area of application

  • As with REMACOAT D-40, the coating of vertical surfaces and overhead spray application is possible only under certain conditions
  • Concrete floors
  • Tank floors
  • Secondary containment
REMACOAT D-40 S
Specific weight
1.13 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 15 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 320%ISO 37-1994 (DIN 53504)
Hardness
45 ± 5 Shore DISO 868-2003 (DIN 53505)
Volume abrasion
max. 160 mm³DIN ISO 4649-2006
Resilience
min. 33%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 40 N/mmISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5902866
REMACOAT D-40 ISO 20 kg1transparent
5903092
REMACOAT D-40 S POLY 20 kg1gray
5902897
REMACOAT D-40 ISO 224 kg1transparent
5903102
REMACOAT D-40 S POLY 240 kg1gray
top
REMACOAT C
Properties

  • Wide-ranging resistance to chemicals, particularly petrol and aviation fuel, heating oil and used or unused internal combustion engine oils, up to a minimum period of 72 h (=secondary containment).
  • Standard colour: green; other colours on request


   Area of application

  • Petrochemical refineries
  • Secondary containment
  • Washing and cleaning stations
  • Oil pipelines
  • Secondary containment tanks
  • Marine offshore platforms
REMACOAT C
Antistatic
General technical approval as an organic surface protection for concrete in LAU systems in accordance with DIBt: Z-59.12-304
Specific weight
0.99 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 15 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 250%ISO 37-1994 (DIN 53504)
Hardness
30 ± 5 Shore DISO 868-2003 (DIN 53505)
Volume abrasion
max. 200 mm³DIN ISO 4649-2006
Resilience
min. 35%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 25 N/mmISO 34-1-2004 Method A
Bleeder resistor
max. 1 *10^8 [Ohm]ZH 1/200
Volume resistance
max. 1 *10^8 [Ohm]DIN IEC 60 093
Surface resistance
max. 1 *10^9 [Ohm]DIN IEC 60 167
Ref. No. Designation capacity packing unit colour
5902700
REMACOAT C ISO 20 kg1transparent
5902680
REMACOAT C POLY 20 kg1green
5902670
REMACOAT C ISO 224 kg1transparent
5902690
REMACOAT C POLY 200 kg1green
top
REMACOAT FDA
Properties

  • Tested and approved by a hygiene institute for use in contact with dry foods in accordance with EC Directive 2002/72/EC.
  • Aliphatic polyurea coating system
  • Lightstable
  • Colour stable


   Area of application

  • Food industry
  • Cold-storage rooms
  • Agricultural industry
  • Low-temperature rooms
  • Flat roofs
  • Dams
REMACOAT FDA
Food quality
Approved for contact with dry foods in accordance with:
  • EU Directive 2002/72/EC (including Amending Directive 2005/79/EC)
  • BedarfsgegenständeVO (status: August 2006)
(List of tested food and food groups in accordance with test report H-143062-06-Bg)
Specific weight
1.00 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 15 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 100%ISO 37-1994 (DIN 53504)
Hardness
50 ± 5 Shore DISO 868-2003 (DIN 53505)
Volume abrasion
max. 300 mm³DIN ISO 4649-2006
Resilience
min. 35%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 20 N/mmISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5902790
REMACOAT FDA ISO 20 kg1transparent
5902820
REMACOAT FDA POLY 20 kg1white
5902800
REMACOAT FDA ISO 224 kg1transparent
5902810
REMACOAT FDA POLY 192 kg1white
top
REMACOAT FR
Properties

  • Highly elastic
  • High resistance to tear propagation
  • Fast application and exposure ability due to short gel times
  • Good resistance to aging and atmospheric conditions
  • Standard colour: gray; other colours on request


   Area of application

  • Road tunnels
  • Railway tunnels
  • Floor coatings
  • Building protection
REMACOAT FR
Flame resistant and antistatic
Fulfils the requirements of ÖNORM B 3800 Parts1 and 2 for flame retardant B1, drop formation Tr1 and smoke intensity Q1
Specific weight
1.13 ± 0.02 g/cm³DIN EN ISO 1183
Tear resistance
min. 15 N/mm²ISO 37-1994 (DIN 53504)
Tear elongation
min. 200%ISO 37-1994 (DIN 53504)
Hardness
50 ± 5 Shore DISO 868-2003 (DIN 53505)
Volume abrasion
max. 200 mm³DIN ISO 4649-2006
Resilience
min. 35%ISO 4462-1986 (DIN 53512)
Tear-growth resistance
min. 40 N/mmISO 34-1-2004 Method A
Ref. No. Designation capacity packing unit colour
5903270
REMACOAT FR ISO 20 kg1transparent
5903250
REMACOAT FR POLY 20 kg1gray
5903280
REMACOAT FR ISO 238 kg1transparent
5903260
REMACOAT FR POLY 222 kg1gray
top
REMACOAT primer
Properties

  • Single component
  • Moisture-hardening


   Area of application

Primer for all REMACOAT coating systems on prepared:
  • Concrete
  • Wood
  • Steel
REMACOAT PR 100
Specific weight
0.98 g/cm³DIN EN ISO 1183
Viscosity
ca. 100 mPas
Volume of non-volatile matter
50%
VOC
ca. 494 g/l
Ref. No. Designation capacity packing unit colour
5902835
REMACOAT PR 100 primer 0.8 kg1transparent
5902842
REMACOAT PR 100 primer 4 kg1transparent
5902859
REMACOAT PR 100 primer 20 kg1transparent
top
REMACLIP accessories
  
REMACOAT drum stirrer PMLF
The REMACOAT drum stirrer, Type PMLF, is the economical solution for stirring and homogenizing fluid/solid mixtures in bunghole drums.
Ref. No. Designation capacity packing unit
5901960
REMACOAT drum stirrer PMLF4
For REMACOAT Poly, 200l drums		11
top
Products     |    Legal Indication     |    Imprint