REMAFLON

The solution for extreme material flow problems

REMAFLON lining is a combination of polytetrafluorethylene (PTFE = Teflon®) and rubber. They feature especially slippery surfaces, thereby preventing extreme build-up and mate- rial flow problems. REMAFLON ensures perfect protection in most applications where dust or very fine and slightly moist material prone to buildup has to be conveyed. In particular, the virginal PTFE surface of REMAFLON features outstanding anti-adhesive properties, which make the surface even more slippery.


REMALEN

The special solution for any material flow problem

REMALEN linings are designed for a specially wide range of applications in a wide area of industry thanks to their excellent surface quality. Especially when conveying and hand- ling very fine-particle and dust-like material, linings with REMALEN reduce the build-up of fine material to a minimum and thereby increasing the productivity of your equipment.


REMASLIDE plates

The solution for any material flow problem

REMASLIDE-Platten bestehen aus Polyethylen (PE) und Gummi von höchster Qualität. Durch die gleitfreudige Oberfläche verbessern REMASLIDE-Platten den Materialfluss bei feinen und staubförmigen (nicht scharfkantigen) Materialien und erhöhen dadurch die Durchsatzleistung und somit die Produktivität Ihrer Anlage.


Product Information

Properties

  • Safe protection from material flow Problems
  • Excellent anti-caking properties thanks to the Teflon® surface (PTFE = extremely low adhesion and friction coefficients)
  • Very good chemical resistance
  • Noise damping
  • CN bonding layer provides fast and good adhesion
  • Teflon® surfaces approved for contact with food

Area of Application

  • Used for toughest caking and material flow problems requiring the use of Teflon surfaces, such as for REA plaster or for the molasses segment (wet) of the sugar industry
  • Flow improvement of very fine and powdery, non-abrasive materials
  • Lining to prevent bridging and obstructions
  • Lining for gutters, slides, transfer stations and containers
  • Coating for walls and outlet elements in glass production Lining to prevent bridge formation and blockage

Specifications

Polymer basis PTFE DIN ISO 1629
Specific Weight 2.16 g/cm3 DIN EN ISO 1183-1
Hardness 54 Shore D DIN ISO 7619-1
Colour White

Product Information

Properties

  • Optimum protection from build-up, bridging and against wear
  • Noise damping
  • Reduction of maintenance costs
  • Excellent cost-performance-ratio
  • CN bonding layer provides fast and good adhesion
  • PE surface is food quality

Area of Application

  • Prevents flow problems with very fine and powdery, non-abrasive materials
  • Used in the storage and transport area for bulk and unit load materials
  • Lining for gutters, slides, material trans- fer stations, pipelines, storage container, funnels, cyclones, cones, etc.

Specifications

Polymer basis PE DIN ISO 1629
Specific Weight 0.93 g/cm3 DIN EN ISO 1183-1
Hardness 61 Shore D DIN ISO 7619-1
Colour Transparent

Product Information

Properties

  • Excellent anti-adhesion properties
  • Optimum protection against wear and caking
  • CN bonding layer provides fast and good adhesion

Area of Application

  • Prevents flow problems with fine and powdery (non-sharp-edged) materials for example in coal or ore processing plants or paper, cement or gypsum industry
  • Lining for bunkers, silos and other con- tainers as well as their transport through chutes and hoppers

Specifications

Polymer basis PE-UHMW DIN ISO 1629
Specific Weight 0.94 g/cm3 DIN EN ISO 1183-1
Hardness 63 Shore D DIN ISO 7619-1
Colour Green

Enquire Today